OKUMA & HOWA 2SP-V80
Have one to sell?
ConditionUsed
1 available
2005 Okuma & Howa 2SP-V80's Twin Spindle Vertical Turning Center in Very Good Condition with 31.5" 3-Jaw Chucks, 2-Rear Discharge Chip Conveyors, 2- Auto Doors, 50 Hp. 2-Speed Gearbox Motors! Only 14,786 Cutting Hours Right spindle! Only 12,783 Left Spindle Cutting Hours
2005 Okuma & Howa 2SP-V80's Twin Spindle Vertical Turning
Center in Very Good Condition with 31.5" 3-Jaw Chucks, 2-Rear Discharge Chip Conveyors, 2- Auto Doors, 50 Hp. 2-Speed Gearbox Motors! Only14,000 Cutting Hours!
Okuma & Howa Factory Main Specifications:
Max. Cutting Diameter 31.50" - 39.9"
Max. Swing Diameter 39.37"
Max. Cutting Length 33.07"
Spindle Center Height From Floor 45.28"
Spindle Motor (FANUC aP60) 40 HP 2-Speed Gear Box Motors * Excellent Hard Materials!
Spindle Speed Range 10 - 1,250 RPM
Max. Chuck Diameter * Optional 2-31.5" 3-Jaw Power Chucks
Spindle Nose A2-11
Front Bearing Diameter 7.87"
Max. Weight on Spindle 1,764 lbs.
Spindle Bearings Double Row Cylindrical and Angular Contact
Spindle Speed Selection Direct RPM Programming 2-Speed High-Low Range
Spindle Speed Override 50% - 200%
Speed Range Shift 2- Speed Gear Box Programmable High-Low Range
Axis Drives
X Axis Travel (FANUC a22/3000i AC 4.0 HP) 18.31
Z Axis Travel (FANUC a22/3000iB AC 5.0 HP) 33.07"
Full C-Axis Live Tooling
X Axis Thrust Force 2,950 lbs.
Z Axis Thrust Force 3,170 lbs.
X Axis Ball Screw Diameter/Pitch 1.57"/ 0.47"
Z Axis Ball Screw Diameter/Pitch 1.97"/ 0.47"
X & Z Axis Rapid Traverse Rate 630 IPM
Feedrates 0.00001 - 18.18 IPM
Feedrate Override 0 - 200%
Cooling System for Ball Screws (to minimize expansion) Forced Oil
Turret Type 2-V12
Max. Number of Tools 2- 12 Station
Curvic Coupling Diameter 11.42"
Clamping Force 12,590 lbs.
Indexing Time (station to station) 0.7 sec
Standard Turning Tool Size 1.25" x 1.25"
Max. Boring Bar Size 2.0" & 2.5"
Machine Electric 85 KVA (200v) Transformers
Hydraulic Motor AC 1.5 Kw
Slide Way Lubrication Pump Motor AC 20w
Coolant Pump Motor: Turret (SPK2-8/8; 57 psi/ 8 gpm) AC 550w
Coolant Pump Motor: Wash (CHK4-60/2; 14 psi/31.5 gpm) AC 620w
Machine Light AC 100v-20w
Reservoirs: Hydraulic Tank 10.6 gal
Slideway Lubrication Tank 1.59 gal
Coolant Tank 118 gal
Machine: Height 13.3' (160.0")
Floor Space Requirement
Width 116.9" x Length 92.51" x Height 119.6"
Weight 50,600 lbs. 2-Speed Gearbox Heavier Model
Automatic Open/Close Splash Guard Chain Type Chip Conveyor Both Machines (Rear Discharge)
Chuck Cylinders – Chuck Open/Close Direction Change
Chuck Open/Close Confirmation (Prox. Switches) Memory Protect Key Switch
One Color Signal Tower Chuck Open/Close (Push Button)
Cycle Completion Alarm & Light Door Interlock
High Pressure Coolant (57 psi) Mounting Plates and Leveling Screws
85 Kva Multi-tap Transformer Tool/Work Counter on Screen
Spindle Orientation High Pressure Coolant 120 psi
All Ways are induction hardened to Rockwell C55. All Ways are All Box Ways for maximum rigidity and strength.
Okuma machines use a design that allows the Z-Axis drive to be mounted to the bed of the machine.
This design guarantees perfect alignment of turret to spindle and increases the rigidity of the Z-Axis itself.
Special Offered Timing Price Machine:.. $ Please Email or Call!
2- 31.5" 3-Jaw Chucks Installed on Machine
2- Rear Discharge Lift-Up Chip Conveyors Chain Type
2-Auto Doors Each Side of Machine
Coolant Tanks and all Pumps
2- QTS Quick Tool Setters are Built in Z-Axis Guarding
TERMS: Machine Payment in Full Prior to Shipment.
F.O.B: Rigger's are Required to Prep & Load Machines in Plant.
Delivery: Available Immediate, Subject to Prior Sale.
* Ran Only 99% Aluminum and Nickel Materials Short Run Lots.
We use cookies to improve your experience. Privacy Policy.